QUICK-INSTALL for QUICK-TAPE for the Sharp PC-1500
--------------------------------------------------

This is a small BASIC program and reserve program to make it easier to install
QUICK-TAPE onto a Sharp PC-1500.

It has been developed for use with the version of QUICK-TAPE included with
Pocket Tools: http://pocket.free.fr/html/soft/pocket-tools_e.html

The installer will relocate the QUICK-TAPE and set up the reserve program for
you based on where you've chosen to load QUICK-TAPE into memory. It has been
tested with an unexpanded PC-1500 as well as a PC-1500 with the CE-155 and
CE-161 memory modules.


Preparing QUICK-TAPE
--------------------

You can find the QUICK-TAPE binary program inside the Pocket Tools archive at
PortableApps\POCKTOOL\LISTINGS\FastTape\Quicktape_C5.BIN

Convert the binary program into a wave recording using bin2wav:
bin2wav --pc=1500 --type=bin --addr=0xC5 --name=QUICK-TAPE Quicktape_C5.BIN


Preparing the PC-1500
---------------------

QUICK-TAPE occupies 508 bytes of memory. This space will need to be allocated
between the end of the reserve program memory (the first 197 bytes of memory)
and the start of the BASIC program area (which is defined with the NEW <addr>
statement).

If you're unsure what to do here, just reserve 508 bytes for QUICK-TAPE in PRO
mode with:

NEW PEEK &7863*256+197+508


Installing QUICK-TAPE
---------------------

The installation uses three files, which will be loaded in this order:

QUICK-INSTALL: A BASIC program that handles the installation.
QUICK-TAPE: The QUICK-TAPE program itself (machine language).
QUICK-RESERVE: The reserve program that provides access to QUICK-TAPE.

Type CLOAD and press Enter on the PC-1500. Play QUICK-INSTALL from this archive
and wait for it to load. Once it has done so, enter RUN (in RUN mode).

If there is insufficient memory to load QUICK-TAPE, "No room" will be shown. See
the preceding section on how to make sure enough room is available.

If exactly 508 bytes of space are available then QUICK-TAPE will be loaded there
automatically, so you can skip the next step.

If more than 508 bytes of space are available, you will be prompted where in
memory you'd like to load QUICK-TAPE. Enter the address (by default, this is at
the end of the reserve program, press ENTER to accept this default).

Once the load address has been determined, QUICK-TAPE will be loaded. Play the
QUICK-TAPE program previously generated from Quicktape_C5.BIN.

Once QUICK-TAPE has been loaded, QUICK-RESERVE will be loaded. Play the
QUICK-RESERVE program included in this archive.


Using QUICK-TAPE
----------------

QUICK-TAPE's routines are accessible from the reserve keys under the display.

Group II: (BASIC)   Group III: (Machine language)
  F1 (!) CSAVE        F1 (!) CSAVEM
  F2 (") CLOAD        F2 (") CLOADM
  F3 (#) CLOAD?       F3 (#) CLOADM?
  F4 ($) Z$="         F4 ($) Z$="
                      F5 (%) A=
                      F6 (&) B=

Group I is left blank for your own use. You will need to set the values of
Z$ (filename), A (start address) and B (end address) before pressing a function
key (Z$ can be left blank to load/save without a filename, and A and B only
apply to loading or saving machine language programs).


Converting data with Pocket Tools
---------------------------------

Pocket Tools can be used to convert data to and from the native PC-1500 format
and the QUICK-TAPE format. Use the --pc=1500qt1 option when you wish to read or
write WAV files in the QUICK-TAPE format.


Tips and notes
--------------

QUICK-TAPE's CLOAD works like the native CMERGE, i.e. it will append the loaded
BASIC program to the existing one in memory rather than replace it. Remember to
enter NEW before loading a fresh BASIC program.

QUICK-TAPE's format is fussier about signal phases. You may need to reverse the
phase of the recording before playing it back to load it successfully.


Credits and contact
-------------------

Thank you to the developers of Pocket Tools for including QUICK-TAPE and support
for its format.
This archive's QUICK-INSTALL is by Ben Ryves <benryves@benryves.com> April 2025.
